| |
STAINLESS Steel WELD CLEANING and BRIGHTENING
STAINLESS STEEL Pickling , Passivation Processes |
| |
|
| |
|
| |
|
| |
Stainless Steel in various forms become a prime& important
metal for construction of Chemical Plants and equipments in
Every Engineering Fabrication. All such fabrications are very
regular features in Chemical & Petro-chemical Plants, oil Rigs
Power Pants Equipments, Reaction Vessles for all types of
Industrial applications. Because of extremely good ANTICORROSION
propertiesHigh Mechanical Strength and other
Fabricationaladvantages , All grads of stainless Steel are used
in Every important equipment fabrication. |
| |
|
| |
WELD CLEANING & WELD BRIGHTENING : |
| |
for the reasons of Corrosion protection & the overall aesthetics, it is
extremely essential to Completely & TOTALLY Clean these Black
Weld Areas & Brighten them to original shine of stailness Steel Metal.
This is not only mandatory as per corrosion & safety requirements,
but is also required to be done for the reasons of Hygiene in case of
Food / Dairy, / Petrochemical & Pharmaceutical Plants.
|
| |
|
| |
Methods of WELD CLEANING & WELD BRIGHTENING |
| |
|
| |
The most premitive methods of weld cleaning & Brightening adopted by the
Stainless Steel fabricators have been :
Manual Cleaning by Wire Brushing
Grinding by using mechanical & Electric Tools
San-Papering /Filing / Shot and Grit Blasting.
All these are age old methods, and are redundant and no more useful or
recommended. The MOST MODERN methods of Weld Cleaning &
Brightening is the use of Chemical Cleaning. Several Chemicals, Pastes
Gels, Viscous Liquids & branded chemical formulations are available.
The user must choose products which will guarantee complete freedom
from free chloride & Sulphur ions in their product formulations, Must be
user friendly, very safe for workmen, easy to use,must TOTALLY CLEAN
all the Weld Joints and brighten all the intricate & Non-reachable Steel
Fabrications and most of all, All such selected Chemical formulations
MUST Confirm to the provisions of ASM A 380 / IS 10117 |
| |
|
| |
BRITOSS Range from INNOVATIVE Coating Industries |
| |
Innovative coating Industries, MIDC, Pimpri, Pune offer a total
range of Stailess Steel Weld Cleaners and Brightners under the
name as BRITOSS Range. This comprises off the following : |
| |
|
| |
| CLEENOL SS |
: |
Alkaline Degreaser Used for Oil/Grease, Surface cleaning |
| |
|
| BRITOSS GEL |
|
Thick paste Form cleaner for Vertical & Roof-top cleaning |
| |
|
| BRITOSS S |
|
Viscous Solution, used by Brush / Swab / Spray |
| |
|
| PRE CLEANING |
|
For obtaining Minimum and BEST Weld Cleaning
and Weld Brightening Results, it is MOST ESSENTIAL to completely
Clean the Objet to be Cleaned & MUST BE made Free from Oil, Grease
and all foreign matters. The presence of oil will seriously reduce the
quality of Chemical cleaning. This IMPORTANT PROCESS is a MUST. |
| |
|
| BRITOSS D |
|
Maximum Treatment time shall Not Exceed 15 - 40 minutes for Brushable materials
and Not more than 1 - 2 hrs for Materials used by DIPPING Process.
cleaner
for Vertical & Roof-top cleaning& for Lympet / Jacketted vessles
components cleaning, Heat Exchanger tubes / Pipelines/ SS Fabricated
Tubes in fire fighting equipments/ Chemical Pipelines & Tanks.
Free flowing liquid used by dipping methods, for Small |
|
| |
|
| |
BETTER THAN THE BEST INDIAN, US, European & Australian Brands
The SALIENT Features of BRITOSS Range Are |
| |
|
| |
BRITOSS-G Costs 60 % Lower than Best Brands mentioned above. |
| |
WELD - CLEANING PERFORMANCE : OUTSTANDING & the BEST |
| |
Recommended USES & APPLICATIONS of BRITOSS |
| |
|
| |
Each and every Stainless Steel Fabrication
Chemical & Pharmaceutical Plants and Equipments,
Pre and Post Coolers, Heat Exchanger equipments,
Pipe-Lines, SILOS, Tanks, Oil Tanks on ships, SS Pipes,
SS Fabricated support Structures, Power Generation Plants,
PTD equipments,Heat Exchangers Tube Pickling and
Passivation form inside & outside, Oil Tanks on Ship Liners
Pre-Engineered Buildings, Support Structure & Frame Works |
| |
|
| |
Effluent Treatment : The Products are a mixture of Mineral
Acids, Surfactants, Anti-Oxidants , sesquistering agents and
important additive needing Anti-dripping properties The pH
Adjustments of the effluent water must be done by using
appropriate alkali. Innovative will offer all the necessary
assista ce / Supply of chemicals / Processes, if requestedn . |
| |
|
